DigitalImmersion cooling of servers from
DTL company in a Flow-Cool rack
The technological revolution in construction
Date of Centers and Server
Technological revolution is
PUE - 1, 05
Construction capital costs are 60% less
100 KWT per rack load
Accommodation up to 300 KWT per 1 meter square server
The benefits of immersion cooling
Savings on capital costs during construction 1-2 times!
This is achieved by reducing the required area and volume of premises, as well as reducing the cost of engineering equipment for cooling servers.
Save up to 20% on server hardware design
This is achieved due to the exclusion from the configuration of the elements related to cooling the server, namely the fans and the fan control system By reducing the size and sealing the elements in the server case.
Increased IT equipment productivity
Cooling technology makes it possible to create lower, stable operating temperatures for processors. Thanks to this, it is possible to overclock processors.
Saving on space and space for server racks 70%
The reduction in the size of the premises is due to the exclusion from the design of the machine room of the raised floors and false ceilings necessary for supplying cooled air from below to the racks and the design of the racks located horizontally.
Savings on fire fighting equipment up to 60%
Since server hardware is immersed in dielectric fluid, there is no risk of short circuits. Reduced room volume requires a less efficient fire extinguishing system
Lower operating costs up to 40%
It is reduced primarily due to lower volumes of electricity consumption for cooling servers. And also due to the lack of a large number of fans, the need to perform maintenance of servers to remove dust.
Improving the reliability of equipment
This is achieved in the absence of fans that periodically fail and require replacement. The absence of dust, the absence of vibration during the operation of fans increases the fault tolerance of IT equipment
The possibility of the beneficial use of heat surplus in the amount of 90% of the data center allocated during cooling
Our company has developed and practically implemented the technology for utilizing heat removed from equipment and using it for heating and hot water supply.
A unique opportunity to increase the fleet of server equipment of the data center up to 30% without summing up additional electric power and building new areas
Osobenno eto aktual'no v situatsiyakh, kogda podvedeniye dopolnitel'noy elektricheskoy moshchnosti nevozmozhno po tekhnicheskim ili ekonomicheskim prichinam. 144/5000 This is especially true in situations where the supply of additional electric power is not possible for technical or economic reasons.
The possibility of the beneficial use of heat surplus in the amount of 90% of the data center allocated during cooling
Our company has developed and practically implemented the technology for utilizing heat removed from equipment and using it for heating and hot water supply.
DTL Solutions
Allows to reduce up to 90% of cooling energy.
Designed to service IT equipment in the "hot swap" mode.
The composition is specially designed by our company.
They have an advantage due to the use of immersion cooling of IT equipment.
We make servers according to the OPTIMA program.
Installation of mobile highly loaded data centers.